C9120axi-H C9120ax Internal 802.11ax 4X4: 4 MIMO; IoT; Bt5; Mgig; USB; Rhl

• Customization: Available
• Type: WiFi Bridge
• Work Mode: AP
• Model NO.: C9120AXI-H
• WiFi Antenna Type: External
• Transmission Rate: >200Mbps
• Voltage: 5V
• Antenna Gain: 23dBi
• Color: Gray
• Equipment Mode: Decentralized
• Standby UPS: Square Wave Output UPS
• Output Capacity: Large Type
• Model No.: C9120axi-H
• Transport Package: Carton Box
• Specification: 15*15*3
• Trademark: CISCO
• Origin: China
• HS Code: 85177060
• Production Capacity: 1000

Product Description

Product Description

Product Description

 

C9120AXI-H Specification

Cisco® Catalyst® 9115 Series Wi-Fi 6 Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent. C9120AXI-H is the Cisco Catalyst 9120AX Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, H Domain.

 

Quick Specs

Figure 1 shows the appearance of the C9120AXI-H .

 

Product Details

Cisco AP 9120 series provides these features:

- 802.11ax (Wi-Fi 6)

- Cisco RF ASIC

- Uplink/downlink OFDMA

- MU-MIMO technology

- Target wake time

- BSS coloring

- Intelligent Capture

- Flexible Radio Assignment

- Dual 5-GHz radio support

- Smart antenna connector

- Cisco Mobility Express

- Multigigabit Ethernet support

- Bluetooth 5.0

- Container support for applications

- Apple Features

Table 1 shows the Quick Spec.

Product Code	C9120AXI-H
Description	Cisco Catalyst 9120AX Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, H Domain
Software	· Cisco Unified Wireless Network Software Release 8.9.x or later; · Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later
Supported wireless LAN controllers	· Cisco Catalyst 9800 Series Wireless Controllers · Cisco 3500, 5520, and 8540 Series Wireless Controllers     and  Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities	· 4x4 MIMO with four spatial streams  · Maximal Ratio Combining (MRC)  · 802.11n and 802.11a/g beamforming  · 20- and 40-MHz channels  · PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)  · Packet aggregation: A-MPDU (transmit and receive), A-MSDU     (transmit and receive)   · 802.11 Dynamic Frequency Selection (DFS)   · Cyclic Shift Diversity (CSD) support
802.11ac	· 4x4 downlink MU-MIMO with four spatial streams   MRC   · 802.11ac beamforming   · 20-, 40-, 80-, and 160-MHz channels   · PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)   · Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)   · 802.11 DFS   · CSD suppor
802.11ax	· 4x4 downlink MU-MIMO with four spatial streams   · Uplink/downlink OFDMA   · TWT   · BSS coloring   · MRC   · 802.11ax beamforming   · 20-, 40-, 80-, and 160-MHz channels   · PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)   · Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)   · 802.11 DFS   · CSD support
Integrated antenna	Flexible radio (either on 2.4GHz or on 5GHz)   · 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth   · 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth Dedicated 5GHz radio   · 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
External antenna (sold separately)	· Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)  ·  Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna   · Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios   · Supports Self-Identifiable Antennas (SIA) on one RP-TNC port
Smart Antenna Connector	· Available on the 9120E and on the 9120P only   · Compact multi RF connector with DART interface   · Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector   · Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio
Input power requirements	· 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)   · Cisco power injector, AIR-PWRINJ6=   · 802.3af PoE   · Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
System memory	· 2048 MB DRAM   · 1024 MB flash

ANHUI BORUI SAGINENG TECHNOLOGY CO., LTD 
Business segment: Cisco,  H3C, HP, ARUBA, Extreme and other computer network equipment
The company adheres to the general tone of seeking progress in stability, pragmatic and innovative work, to achieve more quality growth of the company. The company will adhere to the concept of "enterprises are people, enterprises rely on people, enterprises are people", and actively practice corporate social responsibility, so that enterprises and society are harmonious and prosperous, win-win cooperation with partners, and employees grow together.
Quality and technical standards
1. The products provided by Party B must conform to the product performance and product quality standards specified by the original factory.
2. The technical indicators of the products provided by Party B shall conform to national or ministerial standards.
3. Unless otherwise requested by Party A, the specifications, configuration, functions, components and other requirements of the goods shall be based on the specifications provided by Party B, instructions from Party B's personnel and other documents.
After-sales service
1. The products provided by Party B shall be guaranteed in accordance with the standards agreed upon by both parties. Shelf life is one year from the date of delivery.
2. Within the product quality guarantee period, in case of product quality problems, Party A has the right to request Party B to repair or replace the products free of charge; In case of improper use of Party A's personnel, Party B shall also provide timely maintenance services, provided that Party A shall bear the travel and material expenses of Party A's personnel.